Agricultural works for soil disinfection

Field-soil-disinfection

Every year, pests (overwintering insects, nematodes, etc.), diseases (Verticillium spp., Fusarium spp., Phytophthora spp., etc.), and weeds can appear in the field, which can affect crops to a large extent. Thus, it is recommended that every year, before setting up the crop, when preparing the soil, to carry out soil disinfection works with thermal and chemical treatments.

RECOMMENDED PRODUCTS FOR CHEMICAL SOIL DISINFECTION:

Basamid Granules

It is a fumigant disinfectant in the form of granules, which acts against insects, nematodes, diseases, and weeds. Due to the product formulation, it can be applied by scattering and incorporating it in the soil, approximately 30-35 days before setting up the culture.

Recommended products

Read carefully and follow the instructions on the label of each product

Before applying Basamid Granules, the ground must be prepared as follows:

  • All the plant remains have to be removed and the soil must be ground well (to a depth of 30 cm) to avoid the rapid evaporation of the disinfectant gas.
  • It is recommended to ensure a soil moisture of 60% (of the field capacity), both before and during the application of the product.

The application of the product can be done using special equipment or manually.

! It is mandatory to wear protective equipment (gloves, mask, protective suit, and suitable footwear).

Apply at temperatures above 6 °C, when the soil is sufficiently moist. However, the optimum temperature range for application is 10-20 °C.

The microgranules have to be incorporated into the soil to a depth of 15-25 cm, usually with a miller, to ensure a more uniform distribution. The dosage recommended by the producer is 500 kg/ha.

Abundant irrigation is necessary after the application of the product, to favor the decomposition of the granules and the release of the gas.

After treating the soil with Basamid, the ground must be immediately covered with a transparent plastic wrap to keep the released gas in the soil for as long as possible.

After the treatment and until sowing or planting, a break interval of 10-30 days must be ensured (depending on the soil temperature). The lower the temperature (a minimum of 6 °C), the longer the waiting time (over 30 days).

After removing the plastic wrap, double aeration of the soil has to be carried out to release the remaining gas. After that, a phytotoxicity test must be done with indicator plants (watercress, lettuce). A few seedlings are planted in the disinfected soil, and if after 3-4 days no symptoms of toxicity are observed, the culture can be set up. You can also put lettuce seeds in samples of treated soil, and if they do not germinate, the soil still needs time for aeration.

Nemasol 510

It is a liquid, water-soluble disinfectant with a broad spectrum of control, which is applied in the field, in greenhouses and polyhouses. Being a water-miscible product, it is recommended to apply it through the irrigation system. Upon contact with moist soil, Nemasol turns into a gas with a disinfectant effect, which protects crops for a long time (up to 2 crop cycles) against nematodes, diseases, and weeds.

Recommended products

Read carefully and follow the instructions on the label of each product

Before carrying out treatment with Nemasol 510, the soil should be free of all plant debris and ground well (to a depth of 30-40 cm) to promote an even distribution of the solution. Drip irrigation is the most appropriate way to apply Nemasol 510, because it allows a uniform distribution of the solution on the soil surface, but also in its depth.

The drip strips must be installed and covered with plastic wrap, to allow the fumigant gas generated by Nemasol to remain in contact with the pathogens for a longer time.

! It is mandatory to wear protective equipment (gloves, mask, protective suit and suitable footwear).

Recommended products

Read carefully and follow the instructions on the label of each product

Recommended products

Read carefully and follow the instructions on the label of each product

Recommended products

Read carefully and follow the instructions on the label of each product

After that, the solution is prepared and distributed through the irrigation system. It is very important to follow the manufacturer’s recommended dose of 700 L / ha and a concentration of 1-5%.

The minimum application temperature of Nemasol is 15 °C in the soil and 10 °C in the atmosphere. The best time to carry out the treatment is in the morning when the temperatures are not very high.

The soil is kept at rest, covered with plastic wrap, for about 3 weeks. After removing the wrap, a phytotoxicity test must be done with indicator plants (watercress, lettuce). A few seedlings are planted in the disinfected soil, and if after 3-4 days no symptoms of toxicity are observed, the culture can be set up. You can also put lettuce seeds in samples of treated soil, and if they do not germinate, the soil still needs time for aeration.

Thermal disinfection

Thermal disinfection consists of the use of superheated steam, at 135-140 °C, to ensure a temperature of 80 °C in the first 30 cm from the soil surface, for 5-6 hours. At the same time, steam heated to 110-115 °C is used to ensure a temperature of 80 °C after 10-12 hours. The yokes are covered with polyethylene tarpaulins, fixed on the edges, while bags filled with sand or earth are placed on the margins. Under the tarpaulins are inserted hoses, connected to a device. The soil is kept at rest for about 14 days.

Another method of thermal disinfection is soil solarization. This consists in covering the soil with transparent plastic wrap during the warmest period of the year (July-August), to increase the soil temperature by capturing and maintaining the solar radiation. Ideally, the temperature should reach 60 °C in the first 15-16 cm from the soil surface. It is recommended to moisten the soil before mounting the wrap to favor the distribution of heat in the soil and to sensitize the pathogenic microorganisms. It is advisable to bury the edges of the wrap in the ground, to favor the highest possible temperature rise. The soil must be kept covered for about 4-6 weeks, after which the wrap is carefully removed, so as not to bring untreated soil to the surface (which may contain weed seeds).

After thermal disinfection, the soil is left to rest for 10-15 days to restore the microbial flora.

TIPS FOR A PROPER SOIL DISINFECTION:
  • Before carrying out the disinfection treatments, the land has to be freed from all plant debris and the soil must be ground to avoid the rapid evaporation of the disinfectant gas. 
  • After disinfecting with chemicals, before setting up a crop, it is recommended to carry out phytotoxicity tests with lettuce or watercress seedlings. 
  • The soil preparation after disinfection must not be done at a greater depth than the one at which the treatment was carried out in order not to bring the untreated soil in contact with the disinfected one.
  • At the time of disinfection, the soil must be free of any crop plants, as the treatment may affect them.
  • During the treatment, it is mandatory to wear protective equipment and ventilate the treated space. 

Soil disinfection treatments in the field are essential, especially in the case of monoculture or the cultivation of plants affected by common diseases and pests.

×

We help you
to take care of your plants

If you haven't yet found solutions in our articles or previous discussions, start a new discussion and our experts will help you.

New discussion about

Agricultural works for soil disinfection
Agricultural works for soil disinfection

Your information:

Your name must contain a maximum of 30 characters. If you would like to pass on the details of the problem you are facing, please complete the other fields.

The maximum document size is 59 MB.

Add
It helps if you attach some Images or Clips maximumm 15 sec


Want to know more?

Our specialists participate in the discussions of the armuro community with useful information and solutions.
If you want, you can start a discussion about the problem you are facing.
Read the discussions